Easy-Laser E980

measurement and alignment of sawmill machinery

Easy-Laser E980

Easy-Laser E980 is a laser based measurement and alignment system that helps sawmills to make optimal use of their facilities. Correctly set up machines make it possible to maintain a high rate of production with the highest quality end products hour after hour.

Applications

Easy-Laser E980 makes it fast and easy to measure and adjust reducers, counterholds, band and circular saw blades. The laser transmitter in E980 can be used as a point or a rotating point, which gives a ?plane? to measure against. It replaces the traditional cord/wire, that was tensioned in the centre, and enables us to move around freely in the machine, screwing and adjusting, while following the result of the adjustment in real time.

With E980 you can measure straightness, flatness and squareness in relation to the vertical and horizontal planes if you wish. The system is easy for production and maintenance personnel to use and works for both band and circular saws. In addition, it is excellent for measuring flatness and ensuring that the base remains stable and level.

There is a rapid return on the investment through fewer production stoppages and more even quality in the sawn timber.

Features

  • higher production speed
  • less unplanned downtime
  • better product quality
  • longer lifetime for blades
  • longer lifetime for bearings
  • less vibration
  • less waste material

System parts

  • 1 Display unit E51
  • 1 Laser transmitter D23
  • 1 Detector E5
  • 1 BT wireless unit
  • 2 Electronic target
  • 1 Cable 2 m
  • 1 Cable 5 m, extension
  • 1 Magnet base with turnable head
  • 1 Shaft bracket
  • 2 Bracket for electronic target
  • 1 Rod bracket with turnable head
  • 1 Magnet bracket long, with turnable head
  • 1 Magnet bracket short, with turnable head
  • 1 Bracket for tilt table
  • 1 Index table 90°
  • 1 Set of Rods (4×60 mm, 8×120 mm)
  • 2 Large targets
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB memory stick
  • 1 USB cable
  • 1 Battery charger (100?240 V AC)
  • 1 Toolbox
  • 1 Shoulder strap for Display unit
  • 1 Cleaning cloth for optics
  • 1 Carrying case

Contact

Interested in our offer?

Write to us

Grzegorz Pieniążek
Grzegorz Pieniążek
Key Account Manager
+48 606 614 463
+48 (12) 426 97 63
gpieniazek@amcvibro.com


      "By submitting this form, I consent to the processing of my personal data by AMC VIBRO Sp. z o.o. with its registered office in Krakow at Pilotów 2E Street, as personal data administrator, for marketing purposes, including receiving commercial information sent to my email address by AMC VIBRO on its own behalf".


      *required fields