See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example, three-point reference, best fit or all positive. This can also be done directly on-site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient.

The system includes laser transmitter D22 with a manual rotatable head and with the option of deflecting the laser beam 90°. With a few more accessories the system can also be used to check the parallelism of the two tower flanges. In the measurement system’s display unit, it is possible to generate a PDF report containing graphs and measurement data. All information about the measurement object is documented.

For all types of flange

Easy-Laser Flange systems can be used on all sizes of flanges, regardless of diameter. You can measure 1 to 5 circles of measurement points, for example inner, middle and outer circles, to see the taper of the flange. Each circle can have 6-180 measurement points. The program guides you graphically step-by-step through the entire measurement, which quickens the measurement process. Three methods are available: Full circle measurement, Sectional measurement and Partial measurement.

Parallelism of tower flanges

Easy-Laser enables you to measure and check the parallelism of the flanges. This can be done in several ways, as shown to the right with system E910 for example. In addition to the standard equipment, two tripods and an angular prism are required.

Evaluate directly on site

When the measurement of the flange is complete, the digits must then be interpreted. Easy-Laser Flange systems make this extremely easy to do. And you can even do it on-site, without having to go to a PC with separate analysis programs. You can evaluate the result with different calculation settings, for example, “three-point reference”, “best fit” or “all positive”. The result is shown via graphics in true 3D.