Easy-Laser E950

bore alignment

Easy-Laser

Easy-Laser E950

Easy-Laser E950 makes the control and adjustment work of bearings easier thanks to the wireless detector unit and measurement programs that guide you through the measurement process. All of the parts included in the systems are designed and built for even the most demanding workplace and easy setup on any machinery.

Get a quote

Applications

Easy-Laser E950 makes checking and aligning bearings and bearing journals easier thanks to wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the entire measurement process contributes to simple operation.

The system automatically calculates the bearing journals about each other both horizontally and vertically. You can then evaluate the results directly on-site with different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. One new feature is the check of ovality, for example, to analyse the wear rate. The measurement system takes care of all these complicated calculations for you. You measure and align both full and half-bearing journals with equal simplicity. The wireless detector eliminates uncertain factors such as cable pull. All parts are designed for maximum accuracy and stability and measured with a resolution of 0,001 mm [0,05 mils]. Measurement distance up to 40 m [130 feet]. Easy-Laser E950 is suitable for use both in production and out in the field.

Straightness of shafts and coupling alignment

With the systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive train on the market. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.

Available versions

  • E950-A or E950-C
    Primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications. Positioning workpieces in machine tools is also an appropriate application.
  • E950-B or E950-D
    Primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.

Which system to use depends on the application.

Features

  • add, remove and remeasure measurement points
  • measures both full bores and half bores
  • multi-point measurement
  • bore ovality measurement
  • calculate waviness (short and long) and best-fit

System parts

E950-A

  • 1 Laser transmitter D75
  • 1 Detector E7
  • 1 Display unit E51
  • 1 BT wireless unit
  • 1 Cable 2 m
  • 1 Cable 5 m (extension)
  • 1 Offset hub for D75
  • 1 Set of offset hub arms, with magnets
  • 1 Set of rods A
  • 1 Slide bracket Small
  • 1 Slide bracket Medium
  • 1 Slide bracket Large
  • 1 Magnet base
  • 1 Large target
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB memory stick with documentation
  • 1 USB cable
  • 1 Battery charger (100-240 V AC)
  • 1 Toolbox
  • 1 Shoulder strap for the display unit
  • 1 Cleaning cloth for optics
  • 1 Carrying case

E950-B

  • 1 Laser transmitter D75
  • 1 Detector E7
  • 1 Display unit E51
  • 1 BT wireless unit
  • 1 Cable 2 m
  • 1 Cable 5 m (extension)
  • 1 Offset hub for D75
  • 1 Transmitter bracket, with 3 magnet bases
  • 1 Set of rods B
  • 1 Self-centering detector bracket, with 2 magnet bases
  • 1 Large target
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB memory stick with documentation
  • 1 USB cable
  • 1 Battery charger (100-240 V AC)
  • 1 Toolbox
  • 1 Shoulder strap for the display unit
  • 1 Cleaning cloth for optics
  • 1 Carrying case

E950-C

  • 1 Laser transmitter D75
  • 1 Detector E9
  • 1 Display unit E51
  • 1 Cable 2 m
  • 1 Cable 5 m (extension)
  • 1 Offset hub for D75
  • 1 Set of offset hub arms, with magnets
  • 1 Set of rods C
  • 1 Rod adapter for the detector, with built-in target
  • 1 Slide bracket, width 25 mm
  • 1 Slide bracket Small
  • 1 Slide bracket Medium
  • 1 Slide bracket Large
  • 1 Magnet base
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB Memory stick with documentation
  • 1 USB Cable
  • 1 Battery charger (100-240 V AC)
  • 1 Toolbox
  • 1 Shoulder strap for the Display unit
  • 1 Cleaning cloth for optics
  • 1 Carrying case

E950-D

  • 1 Laser transmitter D75
  • 1 Detector E7
  • 1 Display unit E51
  • 1 BT wireless unit
  • 1 Cable 2 m
  • 1 Cable 5 m (extension)
  • 1 Offset hub for D75
  • 1 Arm kit with magnets
  • 1 Extension arm
  • 1 Self-centering detector bracket
  • 1 Large target
  • 1 Shoulder strap for the display unit
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB Memory stick with documentation
  • 1 USB Cable
  • 1 Battery charger (100-240 V AC)
  • 1 Toolbox
  • 1 Hexagon wrench set
  • 1 Cleaning cloth for optics
  • 1 Carrying case

Related products

Contact

Interested in our offer?

Write to us

Grzegorz Pieniążek
Grzegorz Pieniążek
Key Account Manager
+48 606 614 463
+48 (12) 362 97 63
gpieniazek@amcvibro.com


      "By submitting this form, I consent to the processing of my personal data by AMC VIBRO Sp. z o.o. with its registered office in Krakow at Pilotów 2E Street, as personal data administrator, for marketing purposes, including receiving commercial information sent to my email address by AMC VIBRO on its own behalf".


      *required fields