products for monitoring and diagnostics of machinery
products design for home and industry
specialized assembly of electronics, automatics, and mechanics
AVM 2105D module enables continuous monitoring and diagnostics of rotationary machines (ventilators, pumps, compressors, etc.). For each of the channels it is possible to measure: acceleration (RMS, Peak), velocity (RMS, Peak) and Envelope (from configurable time buffer from 0,1 to 10s or full revolute based on KF).
| Inputs | 2 x IEPE |
|---|---|
| Outputs | 5 x relay (NO, NC) |
| SD card save | – |
| Measured values | Acceleration |
| Damage detection | YES |
| Damage localisation | – |
| Application | Rotationary machines: ventilators, pumps, compressors |
| Detected damage examples | Element vibration rate rise signal |
| Acceleration/velocity RMS | YES |
|---|---|
| Acceleration/velocity 0-Peak | YES |
| Envelope | YES |
| Energy in 8 bands | – (available in AVM 2105DV, AVM 2115DA) |
| Revolution periods | – (available in AVM 2105DK) |
| Order analysis | – (available in AVM 2115DA) |
| Amplitude analysis | – (available in AVM 2115DA) |
| Sensor type | 2 x IEPE 1 x revolute marker (KF) |
|---|---|
| Power supply | 24 V DC (18-32 V DC) |
| Power consumption | < 4 W |
| Isolation | 1 kV |
| Operational temperature | -20 °C? +80 °C |
| IP Code | IP20 |
| Low-power relay outputs status/warning/alarm | 4 x relay outputs: ? type of contacts: NC lub NO ? maximum switching voltage +32 VDC (special version +100 VDC) ? work current up to 150 mA ? maximum contact resistance 8 ? (typical 4.7 ?) |
| Power relay output status/warning/alarm | 1 x relay output: ? type of contacts: NC lub NO ? maximum switching voltage +32 VDC ? work current up to 2 A ? maximum switch power up to 60 W |
| 4-20 mA output | 2 x electrical outputs 4-20 mA ? electrical circuit output from +7 VDC to +36 VDC ? resolution 16-bit |
| AC voltage output | 2x voltage output ? buffer ? connected vibration sensors, enabling to connect advanced vibration analyzer, e.g: MTN/VM330D |
| Panel | ? 2 x 8-segment LED display ? 3 x configure buttons ? signal/status LEDs ? microUSB joint ? microSD card slot |
| Dimensions | 23 mm x 100 mm x 120 mm (L x W x H) |
| Mounting | 35 mm DIN rail |
